Development prototype board Olimex LPC-P2378
LPC-P2378 - Development prototype board with LPC2378 Ethernet, USB, 2x CAN, 2xRS232, ETHERNET, SD/MMC.
Detailed Description
FEATURES:
- MCU: LPC2378 16/32 bit ARM7TDMI-S with 512K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC, 4×10 bit ADC 2.44 uS, 2×UARTs, 4×CAN, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6×PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- Optional - TRACE connector
- Ethernet 100MBit
- RS232 port
- CAN driver and connector
- SD/MMC card connector
- UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
- RESET circuit with external control of Philips ISP utility via RS232 port
- Jumpers for ISP/RUN mode
- two USER button
- RESET Button
- two on board voltage regulators 3V and 5V with up to 800mA current
- Extension port connector for many of microcontrollers pins
- single power supply: External power supply, USB or JTAG connector
- Prototype area
- power supply led
- FR-4, 1.5 mm, red soldermask, component print
- Dimension: 100×130mm (3.94×5.12")
Schematic diagram LPC-P2378 prototype board
Other Names:
LPCP2378, LPC P2378
