Development board Olimex LPC-E2124
LPC-E2124 0- board with Ethernet interface for LPC2124 ARM7TDMI-S microcontroller.
Detailed Description
FEATURES:
- MCU: LPC2124 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4×10 bit ADC 2.44 uS, 2×UARTs, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
- CS8900 Ethernet interface
- two general purpose buttons
- potentiometer connected to analog input 0
- Dallas i-button interface
- 24LC515 EEPROM for external web storage
- standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
- two on board voltage regulators 1.8V and 3.3V with up to 800mA current
- single power supply: +5VDC required
- three LAN status LEDs, three general purpose status LEDs
- power supply filtering capacitor
- USB to RS232 interface
- RESET circuit with exterman control of Philips ISP utility via USB/RS232
- RESET button
- DBG jumper for JTAG enable
- BSL jumper for bootloader enable
- JRST jumper for enable/disable external RESET vontrol by RS232
- 14.7456 Mhz crystal
- extension header for all uC ports
- PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
- Dimensions: 80×90 mm (3.15 × 3.55")
Schematic diagram LPC-E2124 development board
Other Names:
LPCE2124, LPC E2124
