Development prototype board Olimex LPC-E2294

Detailed Description

FEATURES:

• MCU: LPC2294 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4×10 bit ADC 2.44 uS, 2×UARTs, 4×CAN, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6×PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
• 1MB (256K×32bit) 12 ns 71V416 SRAM
• 4MB (512K×16bit) 70ns TE28F320C3BD70 C3 INTEL FLASH
• USB to RS232 convertor, board can take power only from USB port
• 4 CAN drivers and connectors
• RESET circuit with exterman control of Philips ISP utility via USB-RS232 virtual port
• Jumpers for boot select from external memory
• Jumpers for ISP/RUN mode
• Ethernet controller with CS8900A and RJ45 connector
• LCD 16×2 DISPLAY with BACKLIGHT
• 2 BUTTONS
• POTENTIOMETER connected to AIN0
• SPI connector
• RS232 driver and connector
• DALLAS i-BUTTON interface and connector
• I2C 24LC515 EEPROM on board
• two on board voltage regulators 1.8V and 3.3V with up to 800mA current

Schematic diagram LPC-E2294 development board

Click to enlarge

Other Names:

LPCE2294, LPC E2294