Development prototype board Olimex LPC-E2294-1MB REV.B

Detailed Description

FEATURES:

• MCU: LPC2294 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4×10 bit ADC 2.44 uS, 2×UARTs, 4×CAN, I2C, SPI, 2×32bit TIMERS, 7×CCR, 6×PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
• optional TRACE connector (not assembled)
• 1MB (256K×32bit) 12 ns 71V416 SRAM (for 1MB version)
• 8MB (2 M × 32bit) 70 ns K1S321611C PSRAM (for 8MB version)
• 2MB (256K×16bit) 70ns TE28F160C3BD70 C3 INTEL FLASH
• LCD 16×2 DISPLAY with BACKLIGHT (1MB version)
• NOKIA 6610 TFT 128x128 12bit color LCD with backlight (8MB version)
• SD/MMC card connector
• USB to RS232 convertor, board can take power from USB port
• RS232 driver and connector
• Ethernet 100Mbit with DM9000E
• 4x CAN drivers and connectors
• UEXT connector for Olimex modules connection - MOD-MP3, MOD-RFID125, MOD-NRF24L01 etc.
• RESET circuit with external control of Philips ISP utility via USB-RS232 virtual port
• Jumpers for boot select from external memory
• Jumpers for ISP/RUN mode
• 2 BUTTONS
• POTENTIOMETER connected to AIN0
• I2C 24LC515 EEPROM on board
• two on board voltage regulators 1.8V and 3.3V with up to 800mA current

Schematic diagram LPC-E2294-1MB REV.B development board

Click to enlarge

Other Names:

LPCE22941MB Rev.B, LPC E2294 1MB Rev.B