Circuits & Schematics Microchip - 3

Manufacturer: "Microchip"
Search results: 49 Output: 21-30
  1. Many people consider white LEDs to be the future of lighting. Strung together, several LEDs can replace an incandescent lamp or a compact fluorescent lamp. High-power white LEDs need a dc voltage of about 3.6 V at a current of about 350 mA to ...
    23-01-2022
  2. Circuits Measurement Microcontrollers Usage Microchip ATtiny10 Attiny13 ATtiny24 ATtiny25 ATtiny44 ATtiny45 ATtiny84 ATtiny85
    TinyLoad is a simple electronic constant current dummy load. The ATtiny measures voltage, current and temperature of the heat sink, calculates power, energy and battery capacity, controls the fan and displays all relevant data on the OLED (Figure ...
    15-11-2021
  1. High efficiency and, hence, low loss is a usual design goal for a PWM circuit. Figure 1 shows one of several channels of low-loss PWM control for hydraulic valves used in heavy industrial machinery. These valves usually have dc resistance of ...
    08-11-2021
  2. Circuits Measurement Supply Microchip LM4041 MIC5159 MIC7221
    You can use monolithic linear regulators at currents lower than 5 A for most applications. Most manufacturers of these devices integrate current-limiting and thermal shutdown to prevent damage during fault conditions. For currents greater than 5 A, ...
    03-11-2021
  3. Circuits Arduino Supply Microcontrollers Usage Microchip ATtiny10 Attiny13 ATtiny24 ATtiny25 ATtiny44 ATtiny45 ATtiny84 ATtiny85
    The ATtiny45/85 USB Phone Charge Guard controls and monitors the charging of phones and other devices (Figure 1). Voltage, current, power and energy are constantly measured via the INA219 and compared with the user limit values. It cuts off the ...
    21-09-2021
  4. Circuits Supply Microcontrollers Usage Microchip ATtiny10 Attiny13 ATtiny24 ATtiny25 ATtiny44 ATtiny45 ATtiny84 ATtiny85
    TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100 mA - 1000 mA) and an OLED display for monitoring. For Power Connecting device is equipped with a Micro-USB and a USB-C connector ...
    19-08-2021
  5. Circuits Microcontrollers Usage Microchip ATtiny10 Attiny13 ATtiny24 ATtiny25 ATtiny44 ATtiny45 ATtiny84 ATtiny85
    Because the 8-pin ATtinys only have a few GPIO pins available, they are usually operated without an external clock. The internal oscillator does a good job in most applications, but when it comes to precise timing, its 10% accuracy is often ...
    04-08-2021
  6. Motivation This is a simple and fully automatic, 12 V uninterruptible power supply system for small/medium power appliances (Figure 1). This power supply specifically designs to drive routers and modems to provide uninterrupted internet and ...
    22-07-2021
  7. 06-07-2021
  8. Many switch-mode power supplies use “kick-start” circuits to initialize their offline operation. These circuits may be simple resistors, such as IRIS4015 , or more complicated arrangements built with bipolar transistors or MOSFETs. ...
    10-06-2020

Sort by: relevance / date